Combat Dubai's extreme heat with professional roof heat insulation and high-SRI reflective coatings. Reduce interior temperatures by up to 10°C and cut your DEWA bills by 15–25%.
In Dubai, roof surface temperatures can exceed 80°C in summer. A dark bitumen or concrete roof absorbs almost all of this heat, which then radiates into the building below — forcing your AC to work harder, running up your DEWA bill, and making upper-floor rooms uncomfortable no matter how cold you set the thermostat.
The solution is a Cool Roof system — a combination of high-performance insulation boards and a white or light-coloured reflective membrane with a high Solar Reflectance Index (SRI). A good cool roof system reflects 70–85% of incoming solar radiation, reducing roof surface temperature from 80°C down to below 40°C.
Dubai Roof Seal installs full cool roof systems combining XPS or PIR insulation boards with our Aliphatic Polyurethane white topcoat — the same technology used in the UAE's Estidama and Green Building frameworks. The result: significantly lower interior temperatures, reduced AC load, and meaningful long-term savings on your energy bill.
We assess your existing roof system, insulation levels, and surface colour to calculate potential heat gain reduction.
Roof surface cleaned, primed, and any existing leaks repaired before insulation installation.
XPS or PIR rigid insulation boards installed at specified thickness (50mm–100mm) and mechanically fixed.
A fully waterproof, seamless PU or EPDM membrane applied over the insulation layer to protect it and provide weather resistance.
High-SRI white aliphatic PU topcoat applied as the final layer for maximum solar reflectance.
50–100mm extruded polystyrene boards under a seamless white PU membrane. Best value system. Reduces heat gain by 60–70%. 10-year warranty.
Higher-performance polyisocyanurate boards for maximum thermal resistance in minimum thickness. Ideal for low-parapet roofs. 10-year warranty.
White aliphatic PU or elastomeric coating applied directly to existing concrete. No insulation boards. Best for budget-conscious upgrades. Reduces surface temp by 30–40°C.
White reflective PU coating applied to existing concrete. No insulation boards. Quick, cost-effective heat reduction.
Full insulation board system with waterproof membrane and reflective topcoat.
Premium high-performance insulation. Best U-value per mm thickness.
Typical all-in price for a 3–4 bedroom villa with full insulation and cool roof system.
Based on our project data, a properly installed cool roof system typically reduces AC-related energy consumption by 15–25%. For a large villa or warehouse, this can mean savings of AED 500–3,000+ per month in peak summer months.
SRI measures how well a surface reflects solar heat, on a scale of 0 (absorbs all heat, like black bitumen) to 100+ (reflects all heat, like white cool roof coating). We use coatings with SRI values of 85–110.
Both provide benefit. The white coating alone is a cost-effective option that reduces surface temperature significantly. Adding insulation boards improves the thermal resistance of the overall roof assembly, providing greater interior comfort and energy savings.
Yes. Our cool roof systems include a fully waterproof membrane layer. You get both heat insulation and waterproofing protection in a single installation — protecting your property from both heat and rain.
A high-quality Aliphatic PU cool roof topcoat maintains its reflective properties for 10–15 years with minimal maintenance. We provide a 10-year written warranty.
Free thermal assessment. Written quote. Full cool roof systems with 10-year warranty. Available across all Dubai areas 7 days a week.
💬 WhatsApp Us Now